












Ultra-low distortion precision linear feedback circuit (PLFC), distortion as low as 0.00008%!
Ultra-low noise power supply design, so that the output noise is as low as 1.3uV (APX555B measured value, not equivalent);
Ultra-compact design, suitable for desktop headphone system;
High precision low temperature drift resistance, its performance is not affected by temperature;
High quality relays and popless sound design;
High precision low noise 256 level relay volume control;
*In order to make the volume more linear in actual use, the extra levels are shielded. 4 Watts into 16 Ohm,2 Watts into 32 Ohm;
20 Hz to 500 kHz Frequency Response;
3 gears of gain control, for IEM or headphones;
High, medium and low three gears can switch gain control;
The headphone amplifier has DC,comprehensive protection such as overvoltage and thermal protection;
Use high-efficiency and ultra-low noise power system.
Inputs: Balanced x1, Unbalanced x1
Outputs: Balanced x2, Unbalanced x1
Output Power: 4W x 2 (16 Ω) 2W x 2 (32 Ω) 1W x 2 (300 Ω) 500mW x 2 (600 Ω)
SNR: 137dB
Output Noise: 1.3uV
THD+N: -121dB, 0.00008% (1kHz, 32 Ω)
THD+N: -120dB, 0.0001% (20-20kHz , 32 Ω, -1dB)
THD: <-125dB,0.00006%
Input Impedance: 47kΩ
Output Impedance: Near 0 Ω
Frequency Response: 20Hz - 500kHz(-3dB)
General Section:
Power supply voltage/: DC15V
Power consumption(EN60065): <30 W
Power consumption in standby mode: <0.1W
Size: 100×62×195mm(WxHxD)
Weight: 0.75kg